Servo Type 350X Power Feed – ECF-350X

Servo Type 350X Power Feed – ECF-350X

Since 1964, Servo Products Company continues to be a trusted name in the power feed industry. For nearly 60 years, Servo has sold their innovative designs worldwide. Beginning with the original Servo Power Feed, their engineers have utilized the latest technology in each model and are now proud to announce our newest and most technologically advanced power feed the Servo Type 350X. Servo’s team of engineers have created their most powerful and efficient unit yet. In keeping the same compact design, they have reengineered the internal components to increase safety while improving reliability and performance backed by a two-year warranty.

*** Please see the Mounting Kit Guide to determine which Mounting Kit you will need. You must provide your machine & Mounting Kit Product Model Number in the Order Comments section at checkout to correctly place your order for this power feed.

The Newest Innovations of Servo Power Feeds:

• Brushless DC motor (BLDC) provides greater efficiency and increased reliability.

• Produces a minimum of 350 inch/pounds of continuous torque as low as 0.3 inches/minute feed rate. This unit replaces our previous Type 140/150/200, resulting in one power feed that can be used on all three axes.

• Extremely accurate speed regulation under varying load conditions, as well as dynamic braking for quick stops.

• Continual monitoring of limit switches/E-Stop status, motor speed, voltage, and current using microprocessor technology.

• Shop-tested performance proves superior to the legendary Bridgeport 6F/8F power feeds.

• Dual voltage capable with an internal connector position change on the circuit board, plus an extremely wide input voltage range (90vac to 145vac) and high voltage selection (195vac to 250vac), resulting in stable operation during power fluctuations.

• Utilizes 75% less current under the same operating conditions than the present industry standard brushed DC motor designs.

• Drive gear changed from Delrin to hard coat anodized 7075 aluminum for extreme reliability and ability to handle the high torque loads. Safety overcurrent protection has been added to the motor/gear drive circuit. No more stripped gears.

• The ability to easily convert the unit from a table feed to a knee feed.

• Only power feed on the market with an Emergency Stop button.

• The limit switches no longer have line voltage (115vac) through them, they now have 5vdc which is much safer in case of cable damage or cuts. No risk of electrical shock.

• Safety logic circuitry to prevent accidental operation after an emergency stop, or during power up. The power feed will not operate after the E-Stop is released if the direction handle is either in the left or right position. The direction handle must be returned to the neutral or off position, then the status LED will turn from red to blue letting you know you can now operate the power feed either right or left direction.

• The RAPID button incorporates a dual color LED that functions as a status indicator.

The table below shows the definition of the red LED flashing:

1 flash Limit switch activation (left direction) 2 flashes Limit switch activation (right direction) 3 flashes E-Stop activation 4 flashes Motor fault 5 flashes Input power overvoltage 6 flashes Input power undervoltage